Q. I have an RCA Modem and a Linksys router WRT54G. I got the router working, it is sending a signal, but I think the IP adress is not programmed onto the router because I cannot connect to the internet.
A. I hate setting up routers for the first time because the instructions didn't help me at all and neither did customer support. When you are installing the router and it says please wait while we check your internet connection settings, reset your modem. As soon as it starts checking connection settings reset it. Work everytime for me.
how do I change my linksys passphrase to access wireless from another computer in the house?
Q. So I just got a new laptop, and I have linksys wireless in my house. I forgot the passphrase to be able to access internet from my laptop. Other answers told me to go to 192.168.1.1 and go to administration, then change it there. I did that, but it's not working. How do I change or figure out my old linksys passphrase?
A. if you dont know the password you will have to reset the router back to factory settings
I have a linksys router and im trying to setup wirless internet through a motorola surf board modem?
Q. I plugged the modem into the linksys router (internet port) and had another ethernet cord connecting to the linksys to the computer (when doing this the computer plugged in doesnt even have internet). I dont have a setup disk for the router, and the linksys setup wizard from the site doesnt seem to work.
A. This could be a lot of things.
1. Reset your cable modem. Unplug for 10 seconds, then plug back in
2. hold down the little button on the linksys router (even if brand new) for like 30 seconds. It should reset to factory defaults.
3. Plug modem into internet port on router.
4. Plug computer into a free port on the router.
5. Check computer settings to make sure it does not have a static ip address. you can do this by going to network connections, Local Area Connection (which should show as connected or plugged in), then right clicking and selecting properties. Then look for TCP/IP properties, and you should see the area where you can change the IP and DNS settings. Make sure these are all blank.
6. You can open internet explorer and type 192.168.1.1 Just that. nothing else.
7. it will ask you for username and password. username is admin, password either blank , or admin.
that should get you into router setup.
1. Reset your cable modem. Unplug for 10 seconds, then plug back in
2. hold down the little button on the linksys router (even if brand new) for like 30 seconds. It should reset to factory defaults.
3. Plug modem into internet port on router.
4. Plug computer into a free port on the router.
5. Check computer settings to make sure it does not have a static ip address. you can do this by going to network connections, Local Area Connection (which should show as connected or plugged in), then right clicking and selecting properties. Then look for TCP/IP properties, and you should see the area where you can change the IP and DNS settings. Make sure these are all blank.
6. You can open internet explorer and type 192.168.1.1 Just that. nothing else.
7. it will ask you for username and password. username is admin, password either blank , or admin.
that should get you into router setup.
How can I get a WRT54G linksys router to connect to the internet?
Q. I reset the router and I've set up a wireless connection ( I think ). I need some help on how I can get my ethernet connected computer to get on the internet. I also need help on making a wireless connection.
A. "Network Magic" is a really usefull program
Powered by Yahoo! Answers
No comments:
Post a Comment