Q. I tried default IP 192.168.1.1 to login to my router but at username/password screen another router model # ( WGR614v6 ) is there. I have logged in before and this is the first time thats happened
A. its probably another linksys router
a neighbor must have installed one
i would advise connecting to the router (directly - with a CAT-5 cable)
and.. just for good measure, turn off your wireless (to ensure you're *only* talking over-the-wire)
THEN try to login - i would say make your network 192.168.10.x (just do whatever it takes to deconflict it from your neighbor's)
a neighbor must have installed one
i would advise connecting to the router (directly - with a CAT-5 cable)
and.. just for good measure, turn off your wireless (to ensure you're *only* talking over-the-wire)
THEN try to login - i would say make your network 192.168.10.x (just do whatever it takes to deconflict it from your neighbor's)
How can i access my linksys router with while useing a Verizon modem?
Q. Im trying to access my Linksys Router by 192.168.1.1 but it's just bringing me to my Verizon modems. Does anyone have any experience with this?
A. Try this link for default IP addresses and login info for a huge list of home networking products:
http://www.answersthatwork.com/Download_Area/ATW_Library/Networking/Network__4-List_of_default_Router_Admin_Passwords_and_IP_addresses.pdf
Hope it helps.
http://www.answersthatwork.com/Download_Area/ATW_Library/Networking/Network__4-List_of_default_Router_Admin_Passwords_and_IP_addresses.pdf
Hope it helps.
I have a linksys router and im trying to setup wirless internet through a motorola surf board modem?
Q. I plugged the modem into the linksys router (internet port) and had another ethernet cord connecting to the linksys to the computer (when doing this the computer plugged in doesnt even have internet). I dont have a setup disk for the router, and the linksys setup wizard from the site doesnt seem to work.
A. This could be a lot of things.
1. Reset your cable modem. Unplug for 10 seconds, then plug back in
2. hold down the little button on the linksys router (even if brand new) for like 30 seconds. It should reset to factory defaults.
3. Plug modem into internet port on router.
4. Plug computer into a free port on the router.
5. Check computer settings to make sure it does not have a static ip address. you can do this by going to network connections, Local Area Connection (which should show as connected or plugged in), then right clicking and selecting properties. Then look for TCP/IP properties, and you should see the area where you can change the IP and DNS settings. Make sure these are all blank.
6. You can open internet explorer and type 192.168.1.1 Just that. nothing else.
7. it will ask you for username and password. username is admin, password either blank , or admin.
that should get you into router setup.
1. Reset your cable modem. Unplug for 10 seconds, then plug back in
2. hold down the little button on the linksys router (even if brand new) for like 30 seconds. It should reset to factory defaults.
3. Plug modem into internet port on router.
4. Plug computer into a free port on the router.
5. Check computer settings to make sure it does not have a static ip address. you can do this by going to network connections, Local Area Connection (which should show as connected or plugged in), then right clicking and selecting properties. Then look for TCP/IP properties, and you should see the area where you can change the IP and DNS settings. Make sure these are all blank.
6. You can open internet explorer and type 192.168.1.1 Just that. nothing else.
7. it will ask you for username and password. username is admin, password either blank , or admin.
that should get you into router setup.
How to reset the linksys wrt54gs to original ip address and login information?
Q. I have a new internet address on my router for the internet and i forgot my stuff for the linksys router/bridge that i am using and now i need to restore it and connect it to my current router wirelessly and get the internet on there as well
A. Push a pin or tip of a paperclip inside the small hole at the back of the router. Hold it for at least 15 secs until the power light comes off and back on. That should reset the router to defaults.
Powered by Yahoo! Answers
No comments:
Post a Comment