Q. I have a linksys router and i wanted to get internet on my wii. And i forget my password so i want to reset it, but im not sure if it will do anything to the computers that have hooked up to it already. Will it?
A. It will disconnect. Also, all your wireless computers will still be using the old encryption key and won't be able to connect to the router. Also, the router will no longer have your Internet Service Provider's gateway IP address and Domain Name Server IP addresses. You'll have to set them all back up again.
All for a Wii?
Here's how to find the encryption key: If the encryption key isn't on a label on your wireless modem or router, the likeliest place to find it is in your router's admin pages. Exactly where in those pages varies from brand to brand. If you don't have a router, the following should apply to your modem itself.
Basically, to get into the admin pages, do this:
1.On a computer connected to a wired port on your router (wireless access to the admin pages should be turned off as a security risk), enter the router's local IP address in your browser's address window.ON A LINKSYS, THIS IS PROBABLY 192.168.1.1. THE LOGIN IS USUALLY A BLANK USERNAME AND ADMIN AS THE PASSWORD.
2.Poke around, especially under wireless security, until you find the encryption key. Copy it down EXACTLY. Copy-and-pasting it into a text file (Wordpad is generally best because it's on almost all Windows machines) is even better, as it can be copy-and-pasted from there into whatever needs it. When you see it, you'll understand why this is a good idea.
To find your router�s IP address in Windows:
3.Click on the Start->Run button.
4.In the text box, type
cmd
and press Enter.
5.A black "DOS box" will pop up. In it, enter
ipconfig /all
A bunch of gibberish will fill the box. Next to "Default Gateway" an IP address will appear. This is your router's IP address.
Hope that helps.
All for a Wii?
Here's how to find the encryption key: If the encryption key isn't on a label on your wireless modem or router, the likeliest place to find it is in your router's admin pages. Exactly where in those pages varies from brand to brand. If you don't have a router, the following should apply to your modem itself.
Basically, to get into the admin pages, do this:
1.On a computer connected to a wired port on your router (wireless access to the admin pages should be turned off as a security risk), enter the router's local IP address in your browser's address window.ON A LINKSYS, THIS IS PROBABLY 192.168.1.1. THE LOGIN IS USUALLY A BLANK USERNAME AND ADMIN AS THE PASSWORD.
2.Poke around, especially under wireless security, until you find the encryption key. Copy it down EXACTLY. Copy-and-pasting it into a text file (Wordpad is generally best because it's on almost all Windows machines) is even better, as it can be copy-and-pasted from there into whatever needs it. When you see it, you'll understand why this is a good idea.
To find your router�s IP address in Windows:
3.Click on the Start->Run button.
4.In the text box, type
cmd
and press Enter.
5.A black "DOS box" will pop up. In it, enter
ipconfig /all
A bunch of gibberish will fill the box. Next to "Default Gateway" an IP address will appear. This is your router's IP address.
Hope that helps.
I have a linksys router and im trying to setup wirless internet through a motorola surf board modem?
Q. I plugged the modem into the linksys router (internet port) and had another ethernet cord connecting to the linksys to the computer (when doing this the computer plugged in doesnt even have internet). I dont have a setup disk for the router, and the linksys setup wizard from the site doesnt seem to work.
A. This could be a lot of things.
1. Reset your cable modem. Unplug for 10 seconds, then plug back in
2. hold down the little button on the linksys router (even if brand new) for like 30 seconds. It should reset to factory defaults.
3. Plug modem into internet port on router.
4. Plug computer into a free port on the router.
5. Check computer settings to make sure it does not have a static ip address. you can do this by going to network connections, Local Area Connection (which should show as connected or plugged in), then right clicking and selecting properties. Then look for TCP/IP properties, and you should see the area where you can change the IP and DNS settings. Make sure these are all blank.
6. You can open internet explorer and type 192.168.1.1 Just that. nothing else.
7. it will ask you for username and password. username is admin, password either blank , or admin.
that should get you into router setup.
1. Reset your cable modem. Unplug for 10 seconds, then plug back in
2. hold down the little button on the linksys router (even if brand new) for like 30 seconds. It should reset to factory defaults.
3. Plug modem into internet port on router.
4. Plug computer into a free port on the router.
5. Check computer settings to make sure it does not have a static ip address. you can do this by going to network connections, Local Area Connection (which should show as connected or plugged in), then right clicking and selecting properties. Then look for TCP/IP properties, and you should see the area where you can change the IP and DNS settings. Make sure these are all blank.
6. You can open internet explorer and type 192.168.1.1 Just that. nothing else.
7. it will ask you for username and password. username is admin, password either blank , or admin.
that should get you into router setup.
How do I set up security with my Linksys wireless router?
Q. I have my Linksys wireless router hooked up to the internet and was just wondering where I need to go in order to set up set security on it. Right now it is set up to none. Please help.
A. go to internet explorer (or other web browser) clear address bar and type "192.168.1.1" press enter. then go to tab that says "wireless" and then subtab labled wireless security click that. then you should see a box click box and select wpa personal. then a box should apear that says key or keycode type password you want there then click save settings. you should be good to go. if that doesnt work call tech support. they will walk you through it step by step. and are free 24/7 (800-326-7114)
How to put a security password on a linksys wireless router?
Q. i have a WRT54G linksys router and i disabled the password so i can be easier on the family, but now i found out that hackers/neighbors/ and others are using this network. How can i put up a password?
A. To change your wireless password:
Open a command prompt on a computer connected to your network, and type in ipconfig. Take the default gateway address and put it in your web browser. The login is usually admin admin, or admin *blank*. Then look through the control panel for an option to change the wireless password.
If you are given the option, use WPA2 with AES for your security settings.
Open a command prompt on a computer connected to your network, and type in ipconfig. Take the default gateway address and put it in your web browser. The login is usually admin admin, or admin *blank*. Then look through the control panel for an option to change the wireless password.
If you are given the option, use WPA2 with AES for your security settings.
Powered by Yahoo! Answers
No comments:
Post a Comment