Q. My home now has Wifi and I can access internet wirelessly and everything. The wifi is secured but it is with a default code that is very long and it would be easier to make a personal password instead of a long one that I can't remember. I lost CD software, are there any other options? I run both a Mac Leopard OS and a Microsoft Windows Vista OS.
A. What's the model number of your router?
try visiting the following urls in your browser, one should trigger a router login page:
http://192.168.0.1
http://192.168.1.1
http://192.168.2.1
(Please note that these IP addresses are internal network addresses- they cannot connect to any website on the internet and are safe to visit- see http://en.wikipedia.org/wiki/Private_network )
Usually linksys routers use the following username/password combos:
(blank)/admin
admin/admin
admin/password
(Note: this is different than the password you'd use to connect wirelessly to your router)
If those fail search for "(model name) default password".
Once you're in, go to the security or wireless tab (It will vary by router) and you should be able to change the wireless password.
Hope this helps!
try visiting the following urls in your browser, one should trigger a router login page:
http://192.168.0.1
http://192.168.1.1
http://192.168.2.1
(Please note that these IP addresses are internal network addresses- they cannot connect to any website on the internet and are safe to visit- see http://en.wikipedia.org/wiki/Private_network )
Usually linksys routers use the following username/password combos:
(blank)/admin
admin/admin
admin/password
(Note: this is different than the password you'd use to connect wirelessly to your router)
If those fail search for "(model name) default password".
Once you're in, go to the security or wireless tab (It will vary by router) and you should be able to change the wireless password.
Hope this helps!
How to put a security password on a linksys wireless router?
Q. i have a WRT54G linksys router and i disabled the password so i can be easier on the family, but now i found out that hackers/neighbors/ and others are using this network. How can i put up a password?
A. To change your wireless password:
Open a command prompt on a computer connected to your network, and type in ipconfig. Take the default gateway address and put it in your web browser. The login is usually admin admin, or admin *blank*. Then look through the control panel for an option to change the wireless password.
If you are given the option, use WPA2 with AES for your security settings.
Open a command prompt on a computer connected to your network, and type in ipconfig. Take the default gateway address and put it in your web browser. The login is usually admin admin, or admin *blank*. Then look through the control panel for an option to change the wireless password.
If you are given the option, use WPA2 with AES for your security settings.
How do I setup security on my Linksys router without the cd?
Q. How can I setup my Linksys router to where no one can steal my internet? I have no cd, and I tried typing admin and password (in multiple ways) already, and it never logs me into the router? Please jhlp...
A. The login to most Linksys routers (usually IP address 192.168.1.1), is a blank username and "admin" (without the "'s) as the password. Here are some security steps I recommend.
Because routers differ as to details, I can't be specific about how to accomplish these actions, but they're almost all done from within the router's administration web pages. Note: It�s best to do them from a computer cabled (even just temporarily) to the router rather than wirelessly, especially since wireless administration will be deactivated by action #1.
Generally, to access your router�s administration pages, hook up a computer directly to the router and enter the router�s local IP address into a browser�s address window. See way below for details on finding your router's IP address.
1.Deactivate wireless access to your router's administration web pages so only a computer connected via an Ethernet cable can reach them. This won�t affect wireless use of the Internet, just wireless administration of the router. Even if you don�t want to leave a computer connected via a cable, leave the cable there for when you need it.
2.Turn off the SSID (network name) broadcast from the router. There's no need to advertise your network's presence. You're not running a hotspot; everyone who should be on your network should know its name.
3.Change your SSID from the default. Hackers know that routers come with default SSIDs and look for them. Even if the SSID isn't being broadcast, if a hacker knows its name, they can hop on board.
4.Set up encryption with an encryption key. The longer, the better. WPA (if your network and all your computers can support 802.11G) is better than WEP. WEP is better than nothing. Each of your wireless computers and devices will need this encryption key. Wired computers will not.
5.(Optional) Limit access to only the computers you want on the network via MAC filtering. (MAC refers to unique NIC (Network Interface Card) addresses, not Macintosh computers, and not IP addresses.) This isn't a defense against hardcore freeloaders -- it's possible to fake MAC addresses -- but it keeps out casual interlopers.
6.(Optional and only partially effective) Change the range of and/or limit the number of automatically assigned IP addresses (DHCP) to reduce the chance of extra users. Again, hackers know what ranges routers come from the factory with. Changing them makes it a little harder to hop on board.
Here�s how to find your router�s IP address:
1.Click on the Start->Run button.
2.In the text box, type
cmd
and press Enter.
3.A black "DOS box" will pop up. In it, enter
ipconfig /all
A bunch of gibberish will fill the box. Next to "Default Gateway" an IP address will appear. This is your router's IP address.
That should go far toward hardening your wireless network.
Because routers differ as to details, I can't be specific about how to accomplish these actions, but they're almost all done from within the router's administration web pages. Note: It�s best to do them from a computer cabled (even just temporarily) to the router rather than wirelessly, especially since wireless administration will be deactivated by action #1.
Generally, to access your router�s administration pages, hook up a computer directly to the router and enter the router�s local IP address into a browser�s address window. See way below for details on finding your router's IP address.
1.Deactivate wireless access to your router's administration web pages so only a computer connected via an Ethernet cable can reach them. This won�t affect wireless use of the Internet, just wireless administration of the router. Even if you don�t want to leave a computer connected via a cable, leave the cable there for when you need it.
2.Turn off the SSID (network name) broadcast from the router. There's no need to advertise your network's presence. You're not running a hotspot; everyone who should be on your network should know its name.
3.Change your SSID from the default. Hackers know that routers come with default SSIDs and look for them. Even if the SSID isn't being broadcast, if a hacker knows its name, they can hop on board.
4.Set up encryption with an encryption key. The longer, the better. WPA (if your network and all your computers can support 802.11G) is better than WEP. WEP is better than nothing. Each of your wireless computers and devices will need this encryption key. Wired computers will not.
5.(Optional) Limit access to only the computers you want on the network via MAC filtering. (MAC refers to unique NIC (Network Interface Card) addresses, not Macintosh computers, and not IP addresses.) This isn't a defense against hardcore freeloaders -- it's possible to fake MAC addresses -- but it keeps out casual interlopers.
6.(Optional and only partially effective) Change the range of and/or limit the number of automatically assigned IP addresses (DHCP) to reduce the chance of extra users. Again, hackers know what ranges routers come from the factory with. Changing them makes it a little harder to hop on board.
Here�s how to find your router�s IP address:
1.Click on the Start->Run button.
2.In the text box, type
cmd
and press Enter.
3.A black "DOS box" will pop up. In it, enter
ipconfig /all
A bunch of gibberish will fill the box. Next to "Default Gateway" an IP address will appear. This is your router's IP address.
That should go far toward hardening your wireless network.
What is Linksys and why can I connect to the Internet?
Q. I recently purchased a new laptop with a wireless card installed. I was very surprised to click on wireless networks and find one "linksys" listed. When I clicked on it, I connected to the internet. How does this work? Sorry, I'm a dim bulb when it comes to computers.
A. What you did was connect to the internet through a linksys router that is within your range. The system is unsecure hence no password. All linksys routers come out of the factory with a default network name of "linksys". It is possible for you to log on to the router itself by typing 192.168.1.1 into any browser. The default login name and password are admin:admin.
As mentioned above, this is an unsecure network which means any body can be logged on including potential hackers. If it is a close neighbor, just make sure you don't get them mad at you for using their system without permission.
As mentioned above, this is an unsecure network which means any body can be logged on including potential hackers. If it is a close neighbor, just make sure you don't get them mad at you for using their system without permission.
Powered by Yahoo! Answers
No comments:
Post a Comment